News

Worm gear reducer general failure causes and troubleshooting methods

Author : Site EditorPublish Time :


Fault type

1. The reducer is overheated

the reason:

Overloading
Too much or too little lubricant
Poor or inappropriate lubricant
Excessive oil friction
Improper connection of shaft and transmission

Method of exclusion:

Adjust to proper load or choose large model
Add proper lubricant according to the instructions
Add appropriate lubricating oil after the oil is discharged
Put a few drops of lubricant on the oil seal
Adjust to proper position

2. Reducer noise

the reason:

Worm gear, worm gear and bad
Bearing damage or excessive clearance
Insufficient lubricant
Foreign body intrusion

Method of exclusion:

Trim tooth contact surface
Replace bearing
Add appropriate amount of lubricant according to the instructions
Remove foreign objects and replace lubricant

3. Abnormal vibration

the reason:

Poorly fixed transmission
Worm gear is severely worn or damaged
The bearing is severely worn or damaged
Loose bolt
Foreign body intrusion

Method of exclusion:

Fixed transmission
Replace worm gear
Replace bearing
Tighten the bolt
Remove foreign objects and replace lubricant

Worm gear reducer general failure causes and troubleshooting methods
The above are several general failure causes and troubleshooting methods of worm gear reducers

Company Profile

Zhejiang Wuma Reducer Co. Ltd is a national Hi-tech enterprise who pecialized in developing and production of various types of speed reducers.Our main products are RV series worm reducerhelical gearbox, WAH series hypoid gear reducer, precision planetary gearbox etc., more than ten series of products. We can also provide the service with special and customized products. Our products have been widely sold to all over China and exported to other countries and regions like Europe, America, Hong Kong, Taiwan and Southeast Asia and so on.

E-mail:wuma@zjwuma.com

Tel: 0086-577-85956223

Fax: 0086-577-88134158

Related News
Hot Product